This tutorial cinematography video will show you how to make a pan tilt unit for your camera using two $9 cordless screwdrivers from Walmart. This is a great camera solution for anyone looking to do things on the cheap.
- Hot
- Latest
-
How To:
Make a Lightweight Body-Mount Rig for Filming Unique Front & OTS Shots
-
How To:
Frame and compose a shot for film
-
How To:
Set up the lighting and camera angles for a music video shot
-
News:
Shoecam Takes Wingsuit Flying to New Heights
-
How To:
See through people's clothes with a video camera
-
How To:
Use a piece of developed film and a camera to see through clothes
-
How To:
Shoot low angle moving shots from ground level with a video camera
-
How To:
Shoot in a film noir setting
-
How To:
Compose a shot with the "rule of thirds"
-
How To:
Protect your moviemaking equipment from rain
-
How To:
Make a low-budget steadicam from cast iron or lightweight PVC for under $30
-
How To:
Make your own HD/HD-SDI capture station inexpensively
-
How To:
Make a camcorder stabilizer
-
How To:
Shoot sunrise or sunsets on video
-
How To:
Set Up an SJ4000 to Take Timelapse Pictures
-
How To:
Make an easy and inexpensive DiY camera dolly out of PVC pipe
-
How To:
Balance your camera stabilizer, flycam or glidecam
-
How To:
Build your own ten foot long camera dolly track
-
How To:
Simulate a dolly shot with just a camera tripod
-
How To:
Shoot landscapes on film
-
How To:
Frame and compose a shot for film
-
How To:
Set up the lighting and camera angles for a music video shot
-
News:
Shoecam Takes Wingsuit Flying to New Heights
-
How To:
See through people's clothes with a video camera
-
How To:
Make a Lightweight Body-Mount Rig for Filming Unique Front & OTS Shots
-
How To:
Use a piece of developed film and a camera to see through clothes
-
How To:
Shoot low angle moving shots from ground level with a video camera
-
How To:
Shoot in a film noir setting
-
How To:
Compose a shot with the "rule of thirds"
-
How To:
Protect your moviemaking equipment from rain
-
How To:
Make a low-budget steadicam from cast iron or lightweight PVC for under $30
-
How To:
Make your own HD/HD-SDI capture station inexpensively
-
How To:
Make a camcorder stabilizer
-
How To:
Shoot sunrise or sunsets on video
-
How To:
Set Up an SJ4000 to Take Timelapse Pictures
-
How To:
Make an easy and inexpensive DiY camera dolly out of PVC pipe
-
How To:
Balance your camera stabilizer, flycam or glidecam
-
How To:
Build your own ten foot long camera dolly track
-
How To:
Simulate a dolly shot with just a camera tripod
-
How To:
Shoot landscapes on film
1 Comment
Can you demonstrate it working with the variable potentiometer in the circuit? I'm curious if the drills have enough torque to smoothly break static friction as it goes from stationary to moving.
Share Your Thoughts